Impinj R2000 Single Port UHF RFID Reader Module/UHF RFID Module Welcome OEM
M2210 UHF RFID Reader module is a high-performance reader/writer designed for high challenging RFID application environment. It employs the newest R2000 RF chip providing the customers unprecedented performance of reading and writing experience.
The maximum power output of this module is 30dBm, with 6dbi antenna, which can realize a efficient reading/writing distance of 8m or above, and over 400tags/s for tags identification. Meanwhile, the compact design makes this module smaller, coupled with the low working voltage of 3.7V, the module is particularly suitable for application in a device such as a handset.
Product Electrical Parameters
| NO. | Name | Parameters |
| 1 | Working Voltage | DC 3.7～5V |
| 2 | Working Current | 1.5A |
| 3 | Standby Current | ≤50mA |
| 4 | Sleep Current | ≤1mA |
| 5 | Working Temperature | -25～+65℃ |
| 6 | Working Humidity | ≤95%(+25℃) |
| 7 | Storage Temperature | -40～+80℃ |
| 8 | Tag Protocol | EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C |
| 9 | Working Frequency | 840～960 MHz |
| 10 | Supporting Working
Areas | China 1,China 2
US, Canada and other regions following U.S. FCC
Europe and other regions following ETSI EN 302
208 with & without LBT regulations Japan,Korea,
Malaysia,Taiwan |
| 11 | RF IC | Impinj R2000 |
| 12 | Output Power | Software adjustable, step interval 1.0dB, maximum 30dBm |
| 13 | Output Power Flatness | ±0.2dBm |
| 14 | Receiving Sensitivity | -82dBm |
| 15 | RF Port Standing
Wave | ≤1.5 |
| 16 | Reading Distance | ≥10m(With 8dBi antenna/Relate to tags type, transmitted power and application environment) |
| 17 | Multi-tag Reading | ≥400 tags/s |
| 18 | Antenna Interface
Amount | one(MMCX) |
| 19 | Interface Communication Rate | 115200bps |
| 20 | Working Temprature Detection | support |
| 21 | Intensive Read/Write
Mode DRM | support |
| 22 | Antenna Connection
Protection | support |
| 23 | RSSI | support |
| 24 | LED | Red light (power indicator ) |
| 25 | Product Cooling Way | Aluminum metal case as cooling fin for the module |
| 26 | Dimension | 56.5*36.0*7.8 MM |
Interface Definition
| Pin NO. | Name | Type | Description |
| 1 | UART_TX | I/O | TTL UART Transmit |
| 2 | UART_RX | I/O | TTL UART Receive |
| 3 | GPIO3 | I/O | Output |
| 4 | GPIO2 | I/O | Output |
| 5 | GPIO1 | I/O | Output |
| 6 | PWREN_MODULE | I/O | When Pull Down This Pin to Ground,The Module Enter Sleeping Mode. |
| 7 | GND | Ground | Ground |
| 8 |
| 9 | VCC | Power | DC 3.7V to 5V Power Input. |
| 10 |
Remark:
The M2210 module developed a corresponding development board kit, coupled with the rapid technology of ultra-high frequency demonstration software DEMO, customers can easily and quickly familiar with the use of M2210 module, and related hardware and software development, shorten the development cycle.
The M2210 development board has a wealth of peripheral interfaces: RS-232, RS485, USB, network interface, wireless WIFI, Wiegand. Customers can choose according to the actual use of the situation.
Development board kit includes: M2210 + development board 1 set, 12V power adapter 1, 1 interface cable. Development board size: 22.0 × 12.0 × 3.5CM.
Note: Development board related configuration to be purchased separately.
Product Tags:
|
|
Single Port Long Distance RFID Reader Writer Compact Design Multi Purpose Images
|
